SCADA TRACE MODE English Forum Post New Topic  Post A Reply
my profile login | register | search | faq | forum home

  next oldest topic   next newest topic
» SCADA TRACE MODE English Forum » TRACE MODE TECHNICAL SUPPORT » Free TRACE MODE Version » How to get IP of RTM and EmbeddedRTM?

   
Author Topic: How to get IP of RTM and EmbeddedRTM?
sanbaoshu001
Junior Member
Member # 2177


Icon 8 posted      Profile for sanbaoshu001           Edit/Delete Post   Reply With Quote 
Oh,my god!
It is so difficult to get the IP address of RTM and EmbeddedRTM node.
The @status and @IP_parameter can not get the IP information.
Could give me a demo or some advice.
Maybe a demo is better.
Thanks.

May send the demo to xxx@yyy.

[ 27.09.2011, 17:28: Message edited by AdAstra Technical Support ]

Posts 8 | From: China  |  IP: IP address | Report this post to a Moderator
AdAstra Technical Support
Moderator
Member # 1832


Icon 1 posted      Profile for AdAstra Technical Support           Edit/Delete Post   Reply With Quote 
Demo project sent to the e-mail.
Posts 91 | From: Russia  |  IP: IP address | Report this post to a Moderator
sanbaoshu001
Junior Member
Member # 2177


Icon 1 posted      Profile for sanbaoshu001           Edit/Delete Post   Reply With Quote 
Then,if the PC has a Ethernet port and wireless adpter.Then this PC has two IP address.
1.How to difine the IP Address of them Using the TM6 software?
2.The WinPAC-8000 has two Ethernet ports,one IP address is 192.168.1.194,another is 192.168.1.195.
Then how to get the two IP Address in TM6?

Posts 8 | From: China  |  IP: IP address | Report this post to a Moderator
AdAstra Technical Support
Moderator
Member # 1832


Icon 1 posted      Profile for AdAstra Technical Support           Edit/Delete Post   Reply With Quote 
IP-addresses of all network adapters on the PC, you can see in the profiler protocol. It is located in the folder of the project node.
To do this in your project node you want to create cnf-file.
In the file you want to set the key "DEBUG=400".
Technique for creating cnf-file is described in the help system.

Posts 91 | From: Russia  |  IP: IP address | Report this post to a Moderator
   

Quick Reply
Message:

HTML is not enabled.
UBB Code is enabled.

Instant Graemlins
   


Post New Topic  Post A Reply Close Topic   Feature Topic   Move Topic   Delete Topic next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:


News | SCADA/HMI | Training | Contact Us

Rambler's Top100 Rambler's Top100



Powered by Infopop Corporation
UBB.classic™ 6.7.2