Abdur Rahman
Forum Member
Member # 1963
|
posted
Hello!
I need Help to communicate OMRON PLC CJ1M-CPU12-ETN with Trace Mode 6.02 via Ethernet via UDP.
The Contents of omron_ip_addr_tab file are:
0 0.4.0 192.168.250.4:9600
1 0.1.0 192.168.250.1:9600
The Contents of Log file are:
INF_LOAD:Starting... ETN3_0
INF_RTM:Detected NT5.RTM 5.1
._.:Professional Debug RTM TM6 IDE ver. 6.02.0
INF_LOAD:Channels = 2
INF_LOAD:Templates=1
INF_LOAD:Objects = 3
INF_RTM:Timer=0.055s CalcLoop=549ms
ERR_MEDIA:PROTOCOL:Open error = -1
ERR_MEDIA:deleted = 47
INF_RTM:ModeSwitch e15=0000 e18=0000 e20=0000
INF_RTM:mode=2(Work) e15=00 e18=00 e20=c0
INF_RTM:start time is 0.563 s
INF_RTM:stoping...
INF_RTM:mode=5(Stop) e15=00 e18=00 e20=c0
INF_RTM:Max basy count = 0
INF_RTM:stop time is 4.25 s
INF_RTM:number of calculation = 13
._.:END OF WORK
Posts 37 | From: Pakistan
| IP: IP address | 
|
Printer-friendly view of this topic
