SCADA TRACE MODE English Forum Post New Topic  Post A Reply
my profile login | register | search | faq | forum home

  next oldest topic   next newest topic
» SCADA TRACE MODE English Forum » TRACE MODE TECHNICAL SUPPORT » Commercial TRACE MODE Version » Frequency of channel recalculating

   
Author Topic: Frequency of channel recalculating
gojlikus
Junior Member
Member # 1975


Icon 1 posted      Profile for gojlikus           Edit/Delete Post   Reply With Quote 
Hi, I want to measure with TM6 a signal that changes 200 times pre second. Will it be enough if a set recalculation period of this channel as "Fast"? What is the biggest frequency of channel recalculation? Thanks for a quick answer.
Posts 9 | From: POLAND  |  IP: IP address | Report this post to a Moderator
AdAstra Technical Support
Moderator
Member # 1832


Icon 1 posted      Profile for AdAstra Technical Support           Edit/Delete Post   Reply With Quote 
Minimum period of channel recalculation in Windows OS is 10 ms. But this period will increase with programs and graphic.
Posts 91 | From: Russia  |  IP: IP address | Report this post to a Moderator
gojlikus
Junior Member
Member # 1975


Icon 1 posted      Profile for gojlikus           Edit/Delete Post   Reply With Quote 
yes I know, but it is for a situation in which I set Recalculation period as "1 CYCLE". But what happens if I set Recalculation period as "FAST CYCLE". Won't it be calculated more than 100 times per second?
Posts 9 | From: POLAND  |  IP: IP address | Report this post to a Moderator
gojlikus
Junior Member
Member # 1975


Icon 1 posted      Profile for gojlikus           Edit/Delete Post   Reply With Quote 
Speaking in few words: I want to use TM6 to measure signal that is changing 200times per second , is it possible? If yes ,than how can I do it? Best regards
Posts 9 | From: POLAND  |  IP: IP address | Report this post to a Moderator
AdAstra Technical Support
Moderator
Member # 1832


Icon 1 posted      Profile for AdAstra Technical Support           Edit/Delete Post   Reply With Quote 
In RTM for Windows XP it is not possible, but you can do it with MicroRTM for WinPAC.
Posts 91 | From: Russia  |  IP: IP address | Report this post to a Moderator
gojlikus
Junior Member
Member # 1975


Icon 1 posted      Profile for gojlikus           Edit/Delete Post   Reply With Quote 
If I use WinCon for such a fast channel recalculating (200 times per second) , will there be a possibility to write these channels to an external SIAD archive ( for example on a PC)? I'm asking because WinCon has small memory inside and I want to write many records into SIAD.
Posts 9 | From: POLAND  |  IP: IP address | Report this post to a Moderator
AdAstra Technical Support
Moderator
Member # 1832


Icon 1 posted      Profile for AdAstra Technical Support           Edit/Delete Post   Reply With Quote 
You can use channels LArc in WinCON and RemArc in RTM.

Channel LArc can save 16000 values.

Posts 91 | From: Russia  |  IP: IP address | Report this post to a Moderator
   

Quick Reply
Message:

HTML is not enabled.
UBB Code is enabled.

Instant Graemlins
   


Post New Topic  Post A Reply Close Topic   Feature Topic   Move Topic   Delete Topic next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:


News | SCADA/HMI | Training | Contact Us

Rambler's Top100 Rambler's Top100



Powered by Infopop Corporation
UBB.classic™ 6.7.2